M/E Jette SajM/E Jette Saj is a multipurpose vessel with large digging capacity and 3 powerful supporting legs that are able to position the vessel in depths up to 13 metres. The propeller system from Aquamaster where a propeller with nozzle turns 360 degrees gives great manoeuvrability. A specially built excavator with a wide range of digging equipment is capable of dredging even very hard materials in depths up to 12 metres. The position of the excavator at the stern ensures a very large working area and it is also possible to dig in shallow waters. 3 powerful supporting legs and electronic digging equipment give very high accuracy.
|
Datasheet: |
|
Call
signal: |
OUVS |
| Built: | 1990 refurbished 1998 |
Chartered from: |
Svendborg Uddybning ApS |
| Class: | Danish Maritime Authorities |
Length: |
25 m |
Width: |
8 m |
Draught: |
Loaded 3.0 m - empty 2.3 m |
| Load capacity | 85 m3 |
| Tonnage GT: |
158 |
| Tonnage NT: |
47 |
| Main engines: | 400 hp. Volvo TAMD 122 |
| Propeller system: | Aquamaster 360 degrees with nozzle |
| Speed: | Loaded 6 knots - empty 8 knots |
| Auxiliary engines: | 2 x 380 V generator installation |
| Navigation: | N/A |
| Excavator: | Hitachi 650 |
| Digging depth: | Max. 13 m |
| Digging equipment: | Long and short digging arm, various digging shovels |
| Microdigger: | Digging equipment with dual GPS positioning |
| Digging capacity: | Up to 300 m3 /hour |
| Three Supports legs: | 16 m long for positioning to a water depth of 13 m |
JD-Contractor A/S 
Nybovej 8-9
7500 Holstebro
Tel. (+45) 9742 6311
post@jdcon.com